What could I get for my blower?

exgmguy · 03-09-2001, 03:10 PM

I have goten myself into a bit of a financial pinch, and was thinking of cashing in on my blower.

What do you guys think I could get for it if I sold it?

S-trim Vortech, about a year of use. Minus the fuel pump, FMU, main bracket, belt, and pulley.

I was going to put it on Ebay, but I thought i'd get some opinions first.

03-09-2001, 04:15 PM

Let me know before you sell it. I might have to break the piggy bank for it. Let me know how much you want for it.

------------------
90' 5.0 GT Convertible Mustang. 69' Mustang Mach 1 Fastback. Too much to list here so if you want to know ask me.
AOL name: Woodnutz351

Godslayer · 03-09-2001, 04:58 PM

Taking my advice eh?

What is it just the head unit?

------------------
87 GT
Full exhaust, K&N, KB Subs, BBK STB, homeade dumps...

87 Taurus
New York
Winters Bite!

Skyman · 03-10-2001, 06:16 AM

Sell the damn NoS kit!

SKy

------------------
-1989 Saleen Mustang #406-TFS Heads, E-303 Cam, Edelbrock Intake, and more. Added Eibach drag launch springs and 70/30's w/ 50/50's.
0-110MPH In car view (963k)
All Throttle through 3 gears! (497k)
<A HREF="http://members.aol.com/lskymanl/burnout.mpg" TARGET=_b

exgmguy · 03-10-2001, 07:26 AM

It's the head unit with the 3.33" pulley, a couple of small brackets, plumbing, new bypass valve. I already have an adequate fuel system, and was going to not use an FMU, so if I were going to keep it I would still have to get the main bracket, 42 lb injectors, crank pulley, belt, and a custom chip. That is about another $1000.00.

Sky, you can't get much for a used NOS kit. Maybe 250.00 bucks. I already have it traded to a friend for a new in the box drag launch kit.

Skyman · 03-10-2001, 06:10 PM

Ohh, too bad to hear exgm.. The drag launch kit sure hooks good, but my car rides around with the nose in the air! Thats what I dont like.

Sky

------------------
-1989 Saleen Mustang #406-TFS Heads, E-303 Cam, Edelbrock Intake, and more. Added Eibach drag launch springs and 70/30's w/ 50/50's.
0-110MPH In car view (963k)
All Throttle through 3 gears! (497k)
<A HREF="http://members.aol.com/lskymanl/burnout.mpg" TARGET=_b

exgmguy · 03-11-2001, 07:27 AM

Screw that noise!!!! I am keeping the blower! I'll just eat Ramen noodles for a week or two.

03-09-2001, 03:10 PM	#1
exgmguy Registered Member Join Date: Feb 1999 Location: Utica, Michigan Posts: 2,631	What could I get for my blower? I have goten myself into a bit of a financial pinch, and was thinking of cashing in on my blower. What do you guys think I could get for it if I sold it? S-trim Vortech, about a year of use. Minus the fuel pump, FMU, main bracket, belt, and pulley. I was going to put it on Ebay, but I thought i'd get some opinions first.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Questions about Alky/Water injection with a positive displacement blower	stangsrule	Power Adders	0	07-22-2003 12:58 PM
A/C and blower motor question	Bad89stang	Windsor Power	5	07-17-2003 02:38 PM
Another blower question	bigred90gt	Windsor Power	2	01-12-2003 11:14 AM
Novi blower problem	exgmguy	Windsor Power	3	05-18-2002 11:30 PM
Blower or n/a parts first: your thoughts?	Capri306	Windsor Power	5	06-05-2001 09:17 PM

03-09-2001, 04:15 PM	#2
1BadMoFo5.0 Guest Posts: n/a	Let me know before you sell it. I might have to break the piggy bank for it. Let me know how much you want for it. ------------------ 90' 5.0 GT Convertible Mustang. 69' Mustang Mach 1 Fastback. Too much to list here so if you want to know ask me. AOL name: Woodnutz351

03-09-2001, 04:58 PM	#3
Godslayer Registered Member Join Date: Mar 1999 Location: Largo, FL USA Posts: 274	Taking my advice eh? What is it just the head unit? ------------------ 87 GT Full exhaust, K&N, KB Subs, BBK STB, homeade dumps... 87 Taurus New York Winters Bite!

03-10-2001, 06:16 AM	#4
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Sell the damn NoS kit! SKy ------------------ -1989 Saleen Mustang #406-TFS Heads, E-303 Cam, Edelbrock Intake, and more. Added Eibach drag launch springs and 70/30's w/ 50/50's. 0-110MPH In car view (963k) All Throttle through 3 gears! (497k) <A HREF="http://members.aol.com/lskymanl/burnout.mpg" TARGET=_b

03-10-2001, 07:26 AM	#5
exgmguy Registered Member Join Date: Feb 1999 Location: Utica, Michigan Posts: 2,631	It's the head unit with the 3.33" pulley, a couple of small brackets, plumbing, new bypass valve. I already have an adequate fuel system, and was going to not use an FMU, so if I were going to keep it I would still have to get the main bracket, 42 lb injectors, crank pulley, belt, and a custom chip. That is about another $1000.00. Sky, you can't get much for a used NOS kit. Maybe 250.00 bucks. I already have it traded to a friend for a new in the box drag launch kit.

03-10-2001, 06:10 PM	#6
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Ohh, too bad to hear exgm.. The drag launch kit sure hooks good, but my car rides around with the nose in the air! Thats what I dont like. Sky ------------------ -1989 Saleen Mustang #406-TFS Heads, E-303 Cam, Edelbrock Intake, and more. Added Eibach drag launch springs and 70/30's w/ 50/50's. 0-110MPH In car view (963k) All Throttle through 3 gears! (497k) <A HREF="http://members.aol.com/lskymanl/burnout.mpg" TARGET=_b

03-11-2001, 07:27 AM	#7
exgmguy Registered Member Join Date: Feb 1999 Location: Utica, Michigan Posts: 2,631	Screw that noise!!!! I am keeping the blower! I'll just eat Ramen noodles for a week or two.