Supercharger in a stock '95?

mustang17 · 03-01-2001, 10:17 PM

bad93gt- You still did not tell me how you got you 19's to flow like 24's. I have been reading and I know, as Unit 5302 said, that 19's flow for up to 350hp. 24's go up to around 400hp. So again, how do you make 19's flow like 24's? You can get a fuel pump to do a thousand lph and that is still not going to make your injectors flow better. Do you see my point?

Unit 5302- I'm not anti-blower. With the right motor you can't beat the power. Why not start with a better motor though? Then you don't have to worry about the bottom end falling apart if you make over 400hp. You do,unfortunately, have to deal with other things breaking, as you said.

Not many people are going to have trouble running 10psi on a stock mustang, very true. You're only making 300+hp, but there are much cheaper ways to make 300fwhp with a 5.0.

Andrew- If you think you want around 300hp consider this combo. Ported stock heads, after market intake, a mild cam, exhaust and you should be there. All this for under $1500!

It's always good to have more than one opinion. Hope this helps.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
bbk unequals and stock H pipe :(	scale	Windsor Power	4	06-14-2002 11:41 AM
Stock No More	Stroked408	Windsor Power	9	06-12-2002 08:19 PM
Supercharger or Turbo(s)? How much hp?	RodsByRad	Windsor Power	10	06-11-2002 04:12 PM
Is a Ported Stock Intake Worth It?	Stang_Crazy	Windsor Power	9	09-28-2001 04:22 PM
LT's vs. shorties vs. stock headers	jonnyk	Windsor Power	9	01-01-2001 11:28 AM

03-01-2001, 10:17 PM	#18
mustang17 Registered Member Join Date: Sep 2000 Location: Concord, MA, USA Posts: 264	bad93gt- You still did not tell me how you got you 19's to flow like 24's. I have been reading and I know, as Unit 5302 said, that 19's flow for up to 350hp. 24's go up to around 400hp. So again, how do you make 19's flow like 24's? You can get a fuel pump to do a thousand lph and that is still not going to make your injectors flow better. Do you see my point? Unit 5302- I'm not anti-blower. With the right motor you can't beat the power. Why not start with a better motor though? Then you don't have to worry about the bottom end falling apart if you make over 400hp. You do,unfortunately, have to deal with other things breaking, as you said. Not many people are going to have trouble running 10psi on a stock mustang, very true. You're only making 300+hp, but there are much cheaper ways to make 300fwhp with a 5.0. Andrew- If you think you want around 300hp consider this combo. Ported stock heads, after market intake, a mild cam, exhaust and you should be there. All this for under $1500! It's always good to have more than one opinion. Hope this helps.