Supercharger in a stock '95?

Killercanary · 03-02-2001, 10:49 AM

How fast do you want to go? I can tell you how to pick up 8.5mph, and drop 1.4 tenths for hundreds less than a blower. Look at my mods:
edelbrock intake
65mm T-body
shorty headers
X pipe
stock flow tubes
2 chamber flowmasters
stock tail pipes
adjustable FPR
pulleys
K&N
advanced timing
HD clutch
3.73 gears
alum DS
and Nitto drag radials
Stock-heads, MAF, injectors, and fuel pump

I went from 15.2 at 90mph to 13.8's at 98.3-98.5mph. I know my cosuin's 100% stock 94GT coupe ran 14.8 at 93mph stock. Add to that what I gained and you're looking at 13.4 at 101.5mph.
Again this hypothetical, but I can attest to the fact that I've seen many 94-95 GT's with heads, intake, cam etc that only run 101-102mph in the 1/4. I've even seen two SC 94-95's at my track that struggle to run 101mph. Its all up to you though. On a side note, my cousin mentioned above with just gears, pulleys, and mufflers ran 14.2's at 97mph on street tires. He has just added a Kenne Bell blowzilla rated at 6lbs, and the car has no traction until 3rd, and even then it spins sometimes. With traction I firmly believe he is in the 12 second zone.

------------------
95 GT convt' 5 speed, 3.73's,FMS HD clutch, Pro 5.0 shifter, ASP alum. underdrive pulleys, Bassani offroad X pipe, 2 chmbr flowmasters, K&N w/o silencer, edelbrock performer intake, FRPP 65mm T-body, FRPP shorty headers, FRPP aluminum driveshaft.Hooker 4pt chrome car bar, Xenon/Wings West ground effects, custom interior
Best ET: 13.83
Best MPH: 98.55mph with Best 60': 1.91 on Nitto DR's
Homepage: <A HREF="http://www.angelfire.com/pa2/killercanary" TARGET=_blank>http://www.angelfire

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
bbk unequals and stock H pipe :(	scale	Windsor Power	4	06-14-2002 11:41 AM
Stock No More	Stroked408	Windsor Power	9	06-12-2002 08:19 PM
Supercharger or Turbo(s)? How much hp?	RodsByRad	Windsor Power	10	06-11-2002 04:12 PM
Is a Ported Stock Intake Worth It?	Stang_Crazy	Windsor Power	9	09-28-2001 04:22 PM
LT's vs. shorties vs. stock headers	jonnyk	Windsor Power	9	01-01-2001 11:28 AM

03-02-2001, 10:49 AM	#23
Killercanary Registered Member Join Date: Nov 1999 Location: Altoona, PA Posts: 336	How fast do you want to go? I can tell you how to pick up 8.5mph, and drop 1.4 tenths for hundreds less than a blower. Look at my mods: edelbrock intake 65mm T-body shorty headers X pipe stock flow tubes 2 chamber flowmasters stock tail pipes adjustable FPR pulleys K&N advanced timing HD clutch 3.73 gears alum DS and Nitto drag radials Stock-heads, MAF, injectors, and fuel pump I went from 15.2 at 90mph to 13.8's at 98.3-98.5mph. I know my cosuin's 100% stock 94GT coupe ran 14.8 at 93mph stock. Add to that what I gained and you're looking at 13.4 at 101.5mph. Again this hypothetical, but I can attest to the fact that I've seen many 94-95 GT's with heads, intake, cam etc that only run 101-102mph in the 1/4. I've even seen two SC 94-95's at my track that struggle to run 101mph. Its all up to you though. On a side note, my cousin mentioned above with just gears, pulleys, and mufflers ran 14.2's at 97mph on street tires. He has just added a Kenne Bell blowzilla rated at 6lbs, and the car has no traction until 3rd, and even then it spins sometimes. With traction I firmly believe he is in the 12 second zone. ------------------ 95 GT convt' 5 speed, 3.73's,FMS HD clutch, Pro 5.0 shifter, ASP alum. underdrive pulleys, Bassani offroad X pipe, 2 chmbr flowmasters, K&N w/o silencer, edelbrock performer intake, FRPP 65mm T-body, FRPP shorty headers, FRPP aluminum driveshaft.Hooker 4pt chrome car bar, Xenon/Wings West ground effects, custom interior Best ET: 13.83 Best MPH: 98.55mph with Best 60': 1.91 on Nitto DR's Homepage: <A HREF="http://www.angelfire.com/pa2/killercanary" TARGET=_blank>http://www.angelfire