ds safety loop?

chatcher · 04-30-2005, 07:23 PM

my dssl i believe is coming into contact with the hpipe and is making a terrible noise i tried moving the u bolt style clamp over a bit but is still making noise and wearing into it anyone have this prob and if so what did you do i was thinking about just removing the bolt altoghter as when i last removed the hpipe i couldnt get the two pieces apart anyways or was thinking about the wrap style clamp not sure what there called oh well let me know what you have done if anything thanks in advance

88workcar · 04-30-2005, 10:41 PM

Welcome to the world

Move the bolt, It get agrivating but we all get it.

USMC302 · 05-05-2005, 09:36 AM

Who was it made by?

05-05-2005, 10:44 AM

Move the bolt so it clears...or remove the bolt all together & maybe throw a few tack welds on the crossover tube. When/if you have to remove the h-pipe someday, you can heat the welds up with a torch or grind the small tack welds off with a grinder or dremel.

chatcher · 05-05-2005, 07:43 PM

i had to take the hpipe off to do the clutch a little while back and the hpipe wouldnt come apart there anyways so i just removed the bolt and no more noise and it is a lakewood dssl

05-09-2005, 12:06 PM

Problem solved! Sweet.

04-30-2005, 07:23 PM	#1
chatcher Registered Member Join Date: Jun 2001 Location: butler pa Posts: 303	ds safety loop? my dssl i believe is coming into contact with the hpipe and is making a terrible noise i tried moving the u bolt style clamp over a bit but is still making noise and wearing into it anyone have this prob and if so what did you do i was thinking about just removing the bolt altoghter as when i last removed the hpipe i couldnt get the two pieces apart anyways or was thinking about the wrap style clamp not sure what there called oh well let me know what you have done if anything thanks in advance __________________ 92lx wannabe saleen

04-30-2005, 10:41 PM	#2
88workcar Registered Member Join Date: Oct 1999 Location: Pierre Part, La. U.S.A. Posts: 1,850	Re: ds safety loop? Welcome to the world Move the bolt, It get agrivating but we all get it. __________________ 88workcar 1988 Mustang LX 342. 417rwhp @ 6800. 28 X 10 ET Drag, 4.30s, 10.69 @ 126.43 1.42 60ft. 11.13 @ 127.7 on BFGs 1.72 60ft Rice Hater # 42 To be old and wise, You must first be young and stupid I'm somewhere in tthe middle.

05-05-2005, 09:36 AM	#3
USMC302 Registered Member Join Date: Apr 2001 Location: Gallatin, Tn Posts: 1,326	Re: ds safety loop? Who was it made by? __________________

05-05-2005, 10:44 AM	#4
Simi Stang Guest Posts: n/a	Re: ds safety loop? Move the bolt so it clears...or remove the bolt all together & maybe throw a few tack welds on the crossover tube. When/if you have to remove the h-pipe someday, you can heat the welds up with a torch or grind the small tack welds off with a grinder or dremel.

05-05-2005, 07:43 PM	#5
chatcher Registered Member Join Date: Jun 2001 Location: butler pa Posts: 303	Re: ds safety loop? i had to take the hpipe off to do the clutch a little while back and the hpipe wouldnt come apart there anyways so i just removed the bolt and no more noise and it is a lakewood dssl __________________ 92lx wannabe saleen

05-09-2005, 12:06 PM	#6
Simi Stang Guest Posts: n/a	Re: ds safety loop? Problem solved! Sweet.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Safety Issue 64 - 70 Mustangs	Mach1 Cobra Jet	Classic Mustangs	20	07-11-2005 08:06 PM
driveshaft safety loop install?	Simi Stang	Windsor Power	16	02-12-2003 07:45 PM
faulty neutral safety switch???	ultraflo	Windsor Power	14	06-14-2002 02:19 AM
Comp. Engineering D/S Safety loop ?'s	chris91LX	Windsor Power	0	03-06-2002 03:52 PM
Safety Recall for 1999 Cobra and 2000 Cobra R	JoeJ	Special Production	0	04-13-2001 08:18 PM