Rusty oil pan...repaint?

[Smokedawg]

Just dont go crazy sanding it and you should be ok. Just rough it up a little with light gride sand paper or maybe a bit with a wire brush. That will be plenty for paint to stick to. I just sanded mine lightly with I believe 250 paper and no problems with paint sticking or walls being to thin.

Good Luck


------------------
347 Stroker Motor: Balanced, 30lb Bosch Injectors, Cobra Computer, Cobra Transmission, GT40 Ported and Polished Upper and Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, March Underdrive Pulleys, Electric Fan, Accel Performance Coil, Accel 300+ Racing Wires, NGK Plugs, Ram Air, K&N Filter, 77mm Mass Air Unit, FlowMaster Exhaust w/offroad H-Pipe, Hurst Short Throw Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, High Tolerant Painted Calipers and Drums.